Connection Settings; Gateway Network Connection; Login; Basic Settings - WEG Cassia X1000 Manual Del Propietário

www.weg.net
a) Identify the gateway using the MAC address.
b) The MAC address is located on the label attached to the bottom of the
Connect to the gateway hotspot (iOS) or wait until the smartphone
displays the nearby gateway network (Android).
a) Name the gateway.
b) The name will be used on the WEG IoT Platform to identify the gateway.
a) Use tags to help identify devices on the Platform.
b) The use of tags is highly recommended. Multiple tags can be assigned to the same device.
a) Make sure there is internet available.
b) Wait for confirmation that the gateway has been added to the Platform.
28 Gateway X1000
gateway.
OR

5.4. CONNECTION SETTINGS

5.4.1 Gateway network connection

a) Make sure the gateway is turned on checking the LED at the bottom.
b) Using a computer or smartphone, connect to the gateway Wi-Fi
network.
c) The network address corresponds to the last 6 digits of the gateway
MAC address. The network password is the same as the address; for
example, for the network "cassia-A12345" the password will be
"cassia-A12345". The following image illustrates where the gateway
MAC address can be found.
d) If you cannot find the gateway Wi-Fi hotspot, you must restart it by
pressing and holding the reset button located at the bottom of the
gateway for 15 seconds.
Figure 5.5 - Gateway network connection

5.4.2 Login

a) Use the web browser (preferably Google Chrome) to access the
gateway page.
b) Enter the IP 192.168.40.1 in the address tab. The screen above
illustrates the initial configuration portal.
c) Standard login
Old Password: admin Username: admin Password: 12345678
d) If the login data have been lost, it is possible to reset the gateway
to factory default by pressing the reset button at the bottom of the
gateway for 15 seconds.
Figure 5.6 - Login

5.4.3 Basic settings

"Basic" tab settings
Router mode > AC Managed Router
TX Power > 20
Statistics Report Interval > 30 Seconds
AC Server Address > cassia.weg.net
AC-Router Comm. Ports > 6246, 6247
Remote Assistance > ON
Connection Priority > According to the connection type
used Wired (cable network)
IP Allocation > Configure according to network availability:
Static IP or DHCP
When using Static IP mode, you must include the following
network information: IP, Netmask, Gateway and DNS.

5.4.4 Wi-Fi network settings

To set the gateway on a Wi-Fi network, you must first select "Operating
Mode: Client". The user can choose DHCP or Static to obtain the IP
address.
The user can also select the secure network mode, being thus
necessary to provide the input data in order to connect the gateway Wi-
Fi with the Enterprise security level.
Figure 5.8 - Wi-Fi network settings
www.weg.net
Figure 5.7 - Basic settings
Gateway X1000 29