Problen Solutions - Lacor VITRO 69232 Instrucciones De Uso

ERROR
E1 The mains supply voltage is less than
140 V.
E2 The mains supply voltage is more
than 275 V.
E3 The temperature sensor has stopped
working
E4 The heating surface temperature is
too high
E5 Internal overheating is detected
42
PROBLEM SOLUTIONS
POSSIBLE CAUSE SOLUTION
1.- Unplug the appliance from the
mains supply
2.- Connect the appliance to a mains
supply with the correct voltage
1.- Unplug the appliance from the
mains supply.
2.- Connect the appliance to a mains
supply with the correct voltage
1.- Contact the technical assistance
service - the sensor needs
replacing
1.- Leave the appliance in STANDBY
mode so that the ventilator cools
the inside of the device
2.- You can use the hob again once
the error message stops
displaying
1.- Contact the technical service. It is
possible that the ventilator is not
working correctly