Hinged Cantilever Mounting Bracket - Kemper 1502199 Instrucciones De Montaje

Hinged Cantilever Mount
Bracket
Art. Nr.: 1502199
Hinged Cantilever
Assembly
● Use the provided mounting holes of the wall consoles (3),
(4), (5) and (6).
● Align the wall console with a spirit level.
● If necessary, position the bearing plates between the
wall bracket and the surface to compensate any
unevenness of the wall surface.
Fig 2-3
● Pull the pin (13) from the wall console (14).
● Position the spacer (15) on the lower leg of the wall console (14).
● Position the mount bracket of the hinged cantilever (16) into
the wall console (14) so that the pin (13) can be easily inserted
again. The spacer (15) must also be threaded below.
● Insert the pin through the wall console (14), the spacer (15)
and the mount bracket of the hinged cantilever (16).
● Secure the inserted pin (13) below the
wall console (14) with the screw M5 x 20 (17).
2-3