Hinged Cantilever Second Part - Kemper 1502199 Instrucciones De Montaje

Hinged Cantilever Second Part

Art. Nr.: 1502199
Hinged Cantilever
Assembly
Fig. 2-5
● Install the pipe bracket (14) onto the second cantilever (22).
● Screw the bracket for the extraction arm (15) with the
clamping profile (16) on the free end of the second cantilever (22).
● Position the spacer (20) on the lower leg of the hinged
cantilever (18)
● Slide the bushing (17) of the second cantilever (22) into the
bracket on the hinged cantilever (18).
● Insert the pin (19) through the holes into the mount bracket on the
first hinged cantilever (18) through the bushing (17) of the second
cantilever (22) and the spacer (20).
● Slide a washer over the end of the pin (19) and secure the pin (19)
with the screw (21).
2-5