PRO LIFTS ARRAY Serie Manual De Instrucciones página 10

Quick operation guide
Diagram 4.6.1
Distance from the
load's center to the
lifting carriage
25 cm
A
(0.82')
30 cm
B
(0.98')
40 cm
C
(1.31')
50 cm
D
(1.64')
For large forks:
60 cm
E
(1.97')
Security system ILS
The TL-A150 incorporates the ILS secu-
rity system (Inertial Lock Security). This
VMB system automatically blocks each
profi le and the lifting carriage in the un-
likely event of cable breaking.
PRO LIFTS S.L.
Maximum load
TL-A150
150 kg
(331 lb)
135 kg
(298 lb)
112 kg
(247 lb)
96 kg
(212 lb)
84 kg
(185 lb)
Depósito legal y copyright 2014. Todos los derechos reservados.
ENGLISH
4.7 - Elevation:
Turn the winch crank clockwise (N
lift the carriage. The unique SRS system
(Sequence Retainer System) will ensure
that the profi les rise in sequence, one af-
ter the other.
4.8 - Hold:
The tower can be left in any intermediate
position if it is necessary. Just stop turning
the handle of the winch and leave it. The
automatic brake of the winch will block it
and hold the load.
4.9 - Lowering:
To bring the lift down you need to fi rst turn
the winch handle gently clockwise (N
release the clutch of the winch. Then turn
the handle anti clockwise (N
fi les have been completely lowered.
4.10 - Transport:
For the transport of the tower is necessary
to fold the machine lowering every profi le
completely. Once the towerlift is comple-
tely folded, place the legs in their trans-
port compartment (S) and the lift will be
ready to be transported.
5. MAINTENANCE.
5.1 - Regularly check the state of the ca-
ble. If the cable has broken threads, or if
it shows any signs of crushed/fl attened
areas, it should be changed and replaced
1
) to
1
) to
2
) until all pro-
10