Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.
INSTALLATION
Attachment
Procedure:
Step 1: Attach the 4 anchoring clips in the slits of the OW panels.
Step 2: Position the device in the desired square in the overhead rail, so that the anchoring clips rest on
the rail and the panel fits snuggly.
Before taking into operation for the first time, the installation has to be approved by an expert!
Connection with the mains
The electric connection must only be carried out by a qualified electrician!
In order to connect the device to the mains, you have to first install an appropriate transformer with a 24 V/60
VA output.
DANGER TO LIFE!
DANGER TO LIFE!
10/19
51928745_V_1_1.DOC