For The Installer - Gewiss Chorus GW 10 862 Manual De Uso

WARNINGS

FOR THE INSTALLER:

Carefully follow all operating regulations applicable to the installing of electrical and
security system, further to the specifications supplied by the manufacturer in the instruction
manual which comes with the products.
Provide the operators with all the instructions for use and the limits of the installed system,
specifying that there are specific standards and different levels of safety performance that
must be adjusted to the relative user requirements.
Make sure the operator acknowledges the warnings provided in this document.
FOR THE OPERATOR
Periodically and carefully check that the system is functional and the enabling and
disenabling procedures are performed correctly.
Perform period maintenance on the system using specialised personnel who have the
qualifications foreseen by the laws in force.
Ask the installer to check the adequacy of the system if any operating conditions change
(e.g. variations in the extension of the areas to be protected, change in the access
procedures etc...).
-------------------------------
This device has been designed, built and tested with maximum care, adopting control
procedures which all conform to the regulations in force. Full compliance of the functional
characteristics is exclusively achieved in the case where its use is limited to the functions
it was designed for, and that is:
Control keyboard for wireless burglar alarm systems using
GW 20 470 and GW 20 481 control units.
No other use or implementation is contemplated and it is therefore impossible to guarantee
it will function correctly.
The production processes are carefully supervised to prevent defects and malfunctions;
nevertheless the components used are subject to extremely low percentages of faults, as
in the case of all electronic or mechanical part.
24