Due to the destination of use of this device (protection of persons and things) we invite the
user to adjust the levels of protection provided by the system to the actual risk levels in loco
(assessing the possibility that this system can operate in a degraded manner due to
malfunctions or faults etc) bearing in mind that there are precise regulations foreseen for
the planning and installation of systems destined to this type of application.
The attention of the operator (system user) is recalled to the need to perform regular
periodic maintenance on the system, and at least comply with what foreseen by the
regulations in force, and also check, at intervals which are appropriate to the risk
levels, that the system functions correctly, testing the signals on the control unit, the
sensors, acoustic alarms, telephone combiners and all other connected devices.
On completing the periodic controls, the operator must promptly notify the installer
of the results.
The planning, installation and maintenance of the systems incorporated in this product are
reserved to personnel who are duly trained and qualified to operate in a secure manner in
compliance with accident prevention regulations.
It is essential that they are installed in compliance with the regulations in force.
The internal parts of some devices are connected to the mains and therefore there is a risk
of electrocution in the case where maintenance operations are performed without
disconnecting both the primary and emergency power supplies.
Some products use rechargeable or normal batteries for emergency power supplies.
If they are connected incorrectly it could damage the product, damage things and endanger
the situation of the operator (explosions and fires).
The device is also compatible with the new burglar alarm control unit GW 10 931; for
the configuration, refer to the control unit programming manual.
Stamp of the installer company:
WARNINGS
25
I
T
A
L
I
A
N
O
E
N
G
L
I
S
H