Safety Definitions; General Safety Instructions; Safety; Safety Instructions For Operation - RedMax LRT-EX110 Manual Del Usuario

Please read the operator's manual carefully
and make sure you understand the
instructions before using the product.
Always wear approved hearing protection
and protective goggles or a visor. A
breathing mask should be used when there
is a risk of dust.
Cutting tool. Do not touch the tool without
first switching off the engine.
Arrows which show limits for handle
positioning.
Note: Other symbols/decals on the product refer to special certification requirements for certain markets.

Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage
to the product, other materials or the
adjacent area if the instructions in the
manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.

General safety instructions

WARNING: Read the warning instructions
that follow before you use the product.
442 - 002 -
This product is not electrically insulated. If the product touches or comes close to high-volt-
age power lines it could lead to death or serious bodily injury. Electricity can jump from one
point to another by arcing. The higher the voltage, the greater the distance electricity can
jump. Electricity can also travel through branches and other objects, especially if they are
wet. Always keep a distance of at least 10 m between the product and high-voltage power
lines and/or any objects that are touching them. If have to work within this safe distance you
should always contact the relevant power company to make sure the power is switched off
before you start work.
The operator of the product must ensure, while working, that no persons or animals come
closer than 15 meters.
Always wear approved protective gloves.
Wear sturdy, non-slip boots.

Safety

• Please read the operator's manual carefully and
make sure you understand the instructions before
using the attachment.
• These instructions supplement the instructions that
were included with the product. For other
procedures, please refer to the operating instructions
for the product.
• Under no circumstances may the design of the
attachment be modified without the permission of the
manufacturer. Do not use a attachment that appears
to have been modified by others and always use
original accessories. Non-authorized modifications
and/or accessories can result in serious personal
injury or the death of the operator or others.

Safety instructions for operation

• If you encounter a situation where you are uncertain
how to proceed you should ask an expert. Contact
your dealer or your service workshop.
• Avoid all usage which you consider to be beyond
your capability.
• Cutting tool. Do not touch the tool without first
switching off the engine.
• Never allow children to use the product.
3