Display Settings - Kenwood KMM-122 Manual De Instrucciones

AUDIO SETTINGS
FADER R15 to F15 (0): Adjusts the rear and front
speaker output balance.
BALANCE L15 to R15 (0): Adjusts the left and right
speaker output balance.
VOLUME OFFSET For AUX: –8 to +8 (0) ; For other sources:
–8 to 0: Preset the initial volume level of each
source. (Before adjustment, select the source
you want to adjust.)
SOUND RECNSTR ON: Creates realistic sound by compensating
(Sound the high-frequency components and restoring
reconstruction) the rise-time of the waveform that are lost in
audio data compression. ; OFF: Cancels.
• [SUB-W LEVEL]/[SUBWOOFER SET]/[LPF SUBWOOFER]/
[SUB-W PHASE] is selectable only if [SWITCH PREOUT] is
set to [SUB-W]. ( 4)
• [SUB-W LEVEL]/[LPF SUBWOOFER]/[SUB-W PHASE] is
selectable only if [SUBWOOFER SET] is set to [ON].
( 10)

DISPLAY SETTINGS

Set the dimmer
Press and hold DISP (DIM) to turn on or off the dimmer.
• If you have set [DIMMER TIME], it will be canceled once you press and hold this button.
Other settings
1
Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following table), then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the instructions
stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press
DISPLAY
DIMMER Dim the illumination.
(Default: ON: Dimmer is turned on. ; OFF: Cancels.
[ON]: 6:00PM; DIMMER TIME: Set the dimmer on and off time.
[OFF]: 6:00AM) 1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
1 Select a zone.
BRIGHTNESS
2 0 — 31: Select your preferred brightness level for the selected zone.
TEXT SCROLL AUTO/ONCE: Select whether to scroll the display information automatically, or scroll only
once. ; OFF: Cancels.
.
ENGLISH
Default: XX
11