Description Of The Control Panel; Electric Power Supply - Palazzetti IDRO Instrucciones De Uso

7 STOVE SETUP AND
USE
7.1 LOADING THE PELLETS
Before the stove can be lit the fuel storage container
PXVW EH ¿OOHG ZLWK SHOOHWV
8VH D VKRYHO WR ¿OO WKH SHOOHW FRQWDLQHU XS )LJ
7.1-1). Do not empty the bag directly into the
container.
7.2 DESCRIPTION OF THE CONTROL
PANEL
The panel is composed of an LCD, ON and OFF
buttons and two MENU (
7.2-1).
By way of the panel you can turn the stove on and
RII DGMXVW RSHUDWLRQ DQG VHW WKH PDQDJHPHQW DQG
maintenance programmes.
The display shows three stove status phases:
1) OFF - indicating that the stove is not
working or is cooling down.
2) START - indicating that the stove is in the
starting phase.
3) WORK - indicating that the stove is on and
warming up.
Stove programming is possible with two different
interfaces:
1) Rolling  WKH DGMXVWPHQW SDUDPHWHUV DSSHDU
one at a time in rotation, on the
second line of the panel.
2) Short  DOO WKH DGMXVWPHQW SDUDPHWHUV DSSHDU
together on the second line of the panel.
The stove is delivered with the Rolling mode.
)
The user can decide to go from the Rolling mode
to the Short mode, or vice versa, in any phase
(paragraph 7.6.3.3).
7.3 COMBUSTION START PHASE

7.3.1 Electric power supply

Connect the stove to the electricity mains and press
the switch down, "I", (on) (par. 6.6.4).
If connection is correct, the stove emits an acoustic
signal, the display turns on and the wording
"PALAZZETTI ECOFIRE" appears (Fig. 7.2-1).
Two seconds later "OFF" appears, as indicated in
Fig. 7.3.1-1 and on the second line the following
parameters appear in rotation:
POWER;
WATER T. SET;
WATER TEMP.;
SET ROOM T.
52/172
USE AND MAINTENANCE
/ ) buttons (Fig.
cod. 00 477 1490 - 11/2013 - PN - Italy
Fig. 7.1-1
Fig. 7.2-1
Fig. 7.3.1-1