Dc Charging Adapter - Wagan Tech Solar e Power Case 450 Manual De Usuario

Solar e Power
To charge the Solar e Power Case using the AC Charging Adapter:
make Sure all Solar e Power CaSe SwiTCheS are SeT To oFF.
1. Connect the AC Charging Adapter to an AC wall socket.
2. Insert the charger's DC plug into the Solar e Power Case's DC Outlet.
3. After charging the battery, disconnect the adapter from the AC wall socket first, then
from the DC Outlet.
4. Store the AC Charging Adapter in the Storage Hatch.

DC Charging Adapter

The DC Charging Adapter is a cord with a fused DC accessory plug at both ends. Both plugs
are fused at 15 amps to prevent damage if there is an inadvertent short. Refer to the mainte-
nance section to replace a fuse if necessary.
12
Case 450 by Wagan Tech
™
Plug AC Charging Adapter into wall socket
www.wagan.com
AC Wall Socket
DC Plug
LED Indicator