Sears CRAFTSMAN 247.881720 Manual Del Operador página 9

4. Pivotflangekeepersoutand positionthe chuteassemblyoverthe
base.See Figure3.
5. Closethe flangekeepersto securethe chute assemblyto the
chutebase. See Figure4. The flangekeeperswill clickinto place
whenproperlysecure.
NOTE:If the flangekeeperswill noteasily clickinto place,usethe
palmof yourhand to applyswift,firm pressureto the backof each.
.
7.
Removethecap, flat washer,and hairpinclip fromthe end of
the chutedirectionalcontrol.
Insertthe end of the chutedirectionalcontrolinto the lower
bracketand securewith the flat washerand hairpinclipjust
removed.See Figure5. If necessary,the lowerbracketcan
be adjusted.Referto ChuteBracketAdjustment i n the
Service& Maintenance section.
Figure4
f
F
Figure3
\
J
Figure5
9