Rear Panel - Audio Pro LIVING LV1 Manual Del Propietário

ENGLISH
FEATURES
- Built-in wireless receiver
- Wireless full CD quality sound
- Wireless range room to room: Up to 20 meters
- Wireless range same room: Up to 50 meters
- Wireless range open field: Up to 100 meters
- No interference or delays
- Works with both Mac and PC
- RF band: 2.4 GHz
- Sample rate: 48 KHz
- Dedicated proprietary protocol
- USB 2.0 interface
OVERVIEW & CONTENTS
Living LV1 loudspeaker
LED, steady blue for established
wireless connection. Flashing blue
for no wireless connection.
Red for standby.

Rear panel

Line input 3.5 To AC
adapter
mm stereo
IR receiver for
remote
Display
Volume control
House code
and Zone buttons
Wallmounting
Use bracket for min 5kg.
Use only single M6 screw
fixture. Do not screw into
cabinet, may damage
inside.
SPECIFICATIONS
Type:
Powered wireless loudspeaker system
with DSP, EmbracingSound
Amplifier:
4 x 25W digital Class D,
Tweeter: 2 x 1" soft dome
Woofer: 2 x 3"
Frequency range:
50 – 20.000Hz
Crossover frequency:
2000Hz (24dB/octave L/R)
Dimensions HxWxD:
195x310x100mm
TX100 wireless transmitter
(Only with LV1-TX)
LED, blue for established wireless connection.
Red for no wireless connection.
House Code switch
*Using the 3.5mm jack you can send wireless audio from units with
line/headphones output. (For example iPod, receiver, etc) TX100 will
need an Audio Pro USB power supply in a setup using 3.5 mm jack.
Remote
On/Off
Master volume
Shows selected
House Code in
display. 1, 2, 3
1 X
technology
TM
3.5mm stereo jack line in*
Mute
Zone volume
Shows selected
zone in display.
A, B, C