Versatis_Conference_uk.qxd
30
3. BASIC FUNCTIONS
3.1
ANSWERING CALLS
When there is an incoming call, the green LEDs on the base and the Pod flash. The
Pod ring tone.
Press any key (except the
l
the ringer volume).
The call timer on the left of the screen displays the duration of the current call in MM:SS (minutes and
seconds) format.
The battery timer on the right of the screen displays the remaining battery life in HH:MM (hours and
minutes) format.
3.2
MAKING CALLS
3.2.1
Direct dialling
Press
.
l
Dial the number you want to call.
l
NB: There is no limit on the total number of digits dialled.
3.2.2
Pre-dialling
With the pre-dialling feature you can key in and, if necessary, modify the number before activating the line.
Dial a number (max. 44 digits).
l
Press
to clear the last digit entered, or press and hold
l
Press
to initiate the call.
l
NB: Whether using pre-dialling or direct dialling, if you want to insert a pause, press and hold
Press
to hang up at the end of the call.
l
3.2.3
Your phone book
The 10-number phone book can be used in direct dialling or pre-dialling mode. See the programming section (5.2 "Adding a number
to the phone book") for details of how to store and edit numbers in the phone book.
Press
.
l
Press any key from
l
Press
to initiate the call.
l
31/03/2005
16:03
Page 30
and
) to answer (the
and
to display the corresponding phone book entry.
icon flashes on the display and you hear the
keys simply increase or decrease
to delete the entire string of digits.
. The symbol "P" appears.