Functional Description - Milwaukee 48-03-3035 Manual Del Operador

Cubierta protectora para perforación de dust trap sds plus

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

IMPORTANT SAFETY

INSTRUCTIONS

READ ALL SAFETY WARN-

WARNING

INGS AND ALL INSTRUC-

TIONS.

Before use, read this instruction sheet, the

tool and dust extractor manuals, and all labels on the

bit, tool, and dust extractor. Failure to follow the

warnings and instructions may result in serious in-

jury. Save all warnings and instructions for future

reference.

• Use only with dust extractors with 'self-cleaning'

filters.

• Use the proper bit for the power tool. The bit

must properly fit the tool.

• Wear a dust mask or use an OSHA compliant

dust extraction solution when working in dusty

situations. Dust particles can harm your lungs.

• This product is suitable for collection of silica

dust when used in accordance with these in-

structions. To reduce the risk of health hazards

from other vapors or dust, do not vacuum car-

cinogenic, toxic or hazardous materials such as

asbestos, arsenic, barium, beryllium, lead, pesticides

or other health endangered materials.

• Ensure unit is properly attached to power tool

before use.

•

Some dust created by power sand-

WARNING

ing, sawing, grinding, drilling, and

other construction activities contains chemicals

known to cause cancer, birth defects or other re-

productive harm. Some examples of these chemi-

cals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending

on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well

ventilated area, and work with approved safety

equipment, such as those dust masks that are

specially designed to filter out microscopic particles.

• The unit is compliant with Table 1 of OSHA

Standard 29CRF 1926.1153 assuming (1) it is

used in accordance with MILWAUKEE instruc-

tions; (2) it is attached to a dust collector that

has a filter with 99% or greater efficiency and

a filter-cleaning mechanism. Please reference

https://www.osha.gov for further details on

compliance methods.

• The unit is compliant as an objective data solu-

tion of OSHA Standard 29CRF 1926.1153 when

it used without a dust collector, assuming it is

used in accordance with MILWAUKEE instruc-

tions. Please reference https://www.osha.gov

for further details on compliance methods.

READ AND SAVE ALL

INSTRUCTIONS

FOR FUTURE REFERENCE.

SYMBOLOGY

Read Operator's Manual

Always wear eye protection. Always

wear respiratory protection when not

using an OSHA compliant solution.

SPECIFICATIONS

Cat. No. ................................................ 48-03-3035

Max bit diameter ............................................... 3/4"

Max bit length ...................................................... 8"

Vacuum port inner diameter .......................... 1-1/4"

Adaptor outer diameter .................................. 1-3/4"

Adaptor inner diameter .................................. 1-1/2"

Adaptor ................................................. 49-90-1957