Display And Buttons - Weelko WKB005 Manual De Instrucciones

Display and buttons

also be selected from the handle's button.
8. After treatment, clean the bottles ABCD and tubes
to avoid blockage.
ULTRASOUND
1. Plug the cable into the "Ultrasound" side socket.
Place it so that "Open" remains on the upper part of
the cable.
2. Clean the patient's face before treatment and apply
some gel on the area to be treated.
3. Select treatment time, adjust intensity from 1 to 10
with the arrows and select the type of wave using the
"MODE" buttons: continuous wave (left button) and
pulsed wave (right button). It is recommended to use
the first one for treatments on normal skins and
thicker tissue areas. The second one, however, is ideal
for sensitive skins and soft tissues. It is recommended
to start with the continuous wave and to gradually
increase the intensity.
4. Press the "Ultrasound" button on the screen to start
the treatment.
5. Move the handle by gently pressing the skin from
bottom to top along the contour lines during 5-8
minutes.