Operating Instructions; Powering The Unit; Installing The Batteries - riptunes RACR-400 Manual De Usuario

OPERATING INSTRUCTIONS

1. Open the battery door on the rear of the unit
2. Insert 4 size "D" batteries (not included) following the diagram
on the inside of the battery panel
3. Click the battery panel back into place
NOTE: Disconnect the power cord from the AC power outlet be-
fore using the battery.
1. Connect the enclosed AC Power Cord into the AC Socket (21)
on the rear of the unit
NOTE: Remove batteries before connecting the power cord to an
AC power outlet.
Your Cassette/Recorder Boombox plays music and audio from the
internal tape cassette, AM/FM receiver and/or shortwave receiv-
er. It can also manage playback from external sources such as an
SD/MMC memory cards, a USB stick or connected device and/or a
Bluetooth connected device.
Playing Music and Audio from the AM/FM/SW1/SW2 Receiver
To play the radio:
1. Move the Mode Switch (12) to Radio
2. Move the Band switch (3) to AM, FM, SW1 (3.0-13.0 MHz) or
SW2 (13.0-23.0 MHz)
3. The Radio automatically begins playing
4. Adjust the Tuning Control (14) to select the desired radio sta-
tion or shortwave frequency
5. Adjust the Volume Control (2) to the desired listening level
6. Adjust the antenna for best reception

POWERING THE UNIT

Installing the batteries

Connecting the AC Power Cord
PLAYING MUSIC/AUDIO
7