Maintenance - SmartBidet SB-3000 Manual Del Usuario

Maintenance

8
CLEANING THE NOZZLE
ᆞWhen you press down onto the "Posterior Wash"(
button for 3 seconds without occupying the seat, the nozzle
will extend. Clean the nozzle with a soft toothbrush.
ᆞAfter cleaning the nozzle, push the "Stop" (
button once again, and the nozzle retracts itself.
CLEANING THE BODY OF UNIT
ᆞWhen you clean this product, do not use thinner, benzene or
toilet bowl cleaner. It may cause damage to the surface of unit.
ᆞUse a wet cloth when you clean this product.
ᆞDo not spray water directly on to this product.
ᆞWhen you clean this product, disconnect the power plug.
CLEANING THE STRAINER
This product will not operate properly if the strainer is clogged.
Please clean the strainer regularly.
1) Close the water shut off valve.
2) Flush the toilet to empty the water reservoir.
3) Unscrew the water filter nut.
4) Clean the strainer with a small brush or water.
5) Re-screw the water filter nut.
6) Open the water shut off valve.
MAINTENANCE FOR WINTER SEASON
ᆞCheck if the power cord is plugged in.
ᆞKeep the water temperature on "Middle or High Level"to prevent water from freezing.
ᆞIf you do not intend to use the unit for 14 days or longer, disconnect the power plug and
drain the water.
)
)
19