EXTERNAL BUTTON CONNECTIONS
1
2 4
5 6S 6P TV INTERC
22 - ENGLISH
PC
ENTRANCE
KITCHEN
INTERCOMMUNICATING
The entryphone can be enabled to receive and make inter-
communicating audio calls . To make an intercommunicating
call, an NO button (e .g . Art . 20066-19066-14066 dual but-
ton) needs to be wired with the enclosed connection cable
and the entryphone needs to be configured using the PC
USB interface and "SaveProg" software .
To configure the intercom buttons without the programmer
and/or personal computer, carry out the following opera-
tions:
• Unhook the cover of button "B" (auxiliary function) (fig-
ure 1) .
• Press the configuration button "R" located below the ring-
tone volume trimmer (figure 2) .
• Press and hold the button you want to set ("B" or "C")
and the hands free button "A" at the same time . When the
door entryphone emits a beep to confirm the setting, you
can release the button . If no beep is emitted at this stage,
repeat the procedure .