Standard Settings - Siemens LZ52650 Instrucciones De Uso

Display
Status line
Settings areas
Direction of rotation display

Standard settings

NOTE
30
The display is divided into different areas:
Status line
The Status line indicates the time, the selected fan mode and
the information text.
The settings areas indicate suggested values which you can
change. The active settings area is lit.
By pressing the relevant Function button, you can change
from one settings area to the next.
b
= Turn rotary selector to the right
c
= Turn rotary selector to the left
If both direction arrows
rotary selector in either direction.
Before switching on the appliance, always follow the
instructions and warnings in the chapter entitled "Safety
instructions".
If required, set the language for the text display.
German has been preset.
The changes to the standard settings will not take effect until
the extractor hood has been switched off.
Each change can be saved by holding down the t button or
deleted by pressing the
Direction of rotation display
Settings areas
d
are displayed, you can turn the
w
button.