Eco-De ECO-699 Manual De Instrucciones página 12

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The water level must stay between the MAX and MIN level line(Fig. 3)
It is recommended to change the water ans clean the water tank frequently.
e) Insert the plug pin into a wall socket and turn on the power switch, that is at the side
of the unit. You will hear a beep and the power indicator will be on.
Note:
For your safety, do not remove the plug with wet hands.
Unplug it, while moving the unit.
Make sure the unit is well connected.
Without
skid
MANTENANCE AND CLEANING
Note: After some time, the filtration mesh becomes clogged with dust and dirt,
which will certainly affect the unit's performance. It is recomended to clean it
frequently.
CLEANING THE FILTRATION MESH
1. Reove the plug from the wall outlet.
2. Pull the filtration mesh outwards (Fig. 4).
3. Clean the filtration mesh with mild detergent and a soft brush
4. Make sure the filtration mesh is completely dry before mounting it.
CLEANING THE WATER TANK
1. Reove the plug from the wall outlet.
2. Pull out the water tank (Fig. 5)
3. Clean it with a mild detergent on a towel and rinse it with water.
4. Put it in place again.
CLEANING THE BODY
1. Clean the body with a mild detergent and a soft cloth.
Note
IMPORTADO POR ECOGEST TRADE S.L.
With skid
C.I.F.: B-97346225

Publicidad

Tabla de contenido
loading

Tabla de contenido