Samsung WA40J3000A Serie Manual Del Usuario página 19

temp. selection
3
button
select cycle
4
option
load size
5
selection button
start/pause
6
selection button
power button
7
WA3000J_WA40J3000AW_USER MANUAL_DC68-03520A-10.indd 19
Press this button repeatedly to cycle through the different water temperature
options.
hot - Whites and heavily soiled, colorfast items.
Warm - Colorfast items.
cold - Brightly colored, very lightly soiled items.
tap cold - Cold water with no warm water added.
If you select the Hot or Warm options, make sure that the cold
and hot water supply hoses are attached correctly.
If the hoses are connected incorrectly, the washer will stop the
cycle.
Press this button to select different cycle options.
extra rinse - Select to add an additional rinse at the end of a wash to
remove laundry additives and perfumes more thoroughly.
To select Extra Rinse, press and hold the Load Size button for approximately
3 seconds.
Press the button repeatedly to cycle through the different spin speed options.
extra large - For heavy loads.
large - For moderate loads. This setting is best for most loads.
medium - For light loads.
small - For very light loads.
Press to pause and restart cycles.
Press once to turn your washer on. Press again to turn your washer off. If
the washer is left on for more than 10 minutes without any buttons being
pressed, the power automatically turns off.
English - 19
2016/6/27 19:11:17