TUCKY -21 Manual De Instrucciones página 4

WARNINGS AND PRECAUTIONS FOR USE
Before using the product, please read these instructions for use carefully and completely to ensure reliability
of the data.
- Tucky is a measurement tool but is not a diagnostic tool. It is not a substitute for monitoring symptoms or
consulting a physician.
- Do not use this thermometer to interpret hypothermia temperatures.
- Tucky should only be applied with the double-sided adhesive provided (ADH-21), on clean and cream-
free skin. Adhesives are single-use and non-repositionable. During use, ensure that the probe remains in
continuous contact with the skin.
- If axillary hairs are present, shave the area to maximize contact between Tucky and the skin.
- In case of heavy sweating or use during sport activities, a single-sided medical adhesive may be added over
the device to improve its hold. A list of recommended adhesives is available on the manufacturer's website.
- Do not apply the device on irritated or damaged skin or if an allergy to plastics (elastomer or silicone type)
and/or adhesives has been detected in the patient.
- The adhesive should be changed every 24 hours or more frequently depending on skin sensitivity. If the skin
shows redness, wait until it disappears before putting the product back on. If irritation occurs, remove the
product immediately and seek advice from a health care professional.
- Tucky and adhesives should be used under normal conditions of temperature and humidity (see "Technical
data"). Otherwise, measurements accuracy cannot be guaranteed.
- The thermometer and adhesives must be transported, stored and put in dry locations, away from direct
sunlight, fire, contamination and within the specified temperature and humidity ranges (see "Technical data").
- It must not be immersed in water: remove Tucky before bathing or showering.
- The product has been designed to follow the curvature of the body. Do not twist it by hand and do not try
to open, repair or modify it. Do not use if damaged.
- Do not use Tucky near strong wave emitting devices (MRI scanners, scanners, portable or mobile RF
communication devices) that may interfere with its operation (see "Electromag. testing").
- Do not use Tucky and adhesives beyond their lifespan (see "Technical Specifications").
- Be sure to keep Tucky and its accessories (adhesives and charger cable) away from children's mouth. They
must be used by adults.
- The device must never be worn during charging. Its functions are then deactivated.
- Check that your device (smartphone or tablet) is compatible with the application and has Bluetooth® and
internet connectivity (see "Technical data" and list of recommended devices).
- Before using Tucky, check the time on your phone as the application is based on it.
- Make sure your smartphone or tablet has enough memory to store data.
- The phone paired with Tucky using Bluetooth® must remain within signal range to receive information (see
"Monitor data wherever you are").
- The manufacturer may change this manual and product specifications without notice. Refer to the digital
version available on the manufacturer's website.
4