Blackmagic Design SmartView Duo Manual De Instalación Y Funcionamiento página 74

Displaying SD in 16 9
:
The set Video Monitor mode to display standard definition video in 16:9:
MONITOR A:↵
ScopeMode: Picture↵
WidescreenSD: ON↵
Displaying SD in 4 3
:
To set Video Monitor mode to display standard definition video in 4:3:
MONITOR A:↵
ScopeMode: Picture↵
WidescreenSD: OFF↵
When setting one of SmartScope Duo 4K ʼ s monitors to audio metering, you can also select which
channels to show. The values for selecting which audio channels are mapped in the following way:
0: Channels 1 and 2
1: Channels 3 and 4
2: Channels 5 and 6
3: Channels 7 and 8
4: Channels 9 and 10
5: Channels 11 and 12
6: Channels 13 and 14
7: Channels 15 and 16
MONITOR B:↵
ScopeMode: AudioDbvu↵
AudioChannel: 0↵
↵
In the example above, Monitor B has been selected to display Audio Metering in Dbvu with audio
channels 1 and 2 selected for the phase meter.
Selecting LUTs for SmartView 4K
To select 3D LUTs using SmartView 4K:
MONITOR A:↵
LUT: 0 LUT 1
1 LUT 2
NONE DISABLE
↵
↵
デベロッパーの皆様へ
74