Chauvin Arnoux PA31ER Manual De Instrucciones página 10

Adaptador de ca para qualistar
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Thank you for purchasing a PA31ER Qualistar+ mains adapter. This accessory is designed to be used
with the C.A 833X Qualistar+.
For best results from your instrument:
„ read these operating instructions carefully,
„ comply with the precautions for use.
WARNING, risk of DANGER! The operator must refer to these instructions whenever this
danger symbol appears.
Equipment protected by double insulation.
Polarity of the connector.
The product is declared recyclable following an analysis of the life cycle in accordance with
standard ISO 14040.
Chauvin Arnoux has adopted an Eco-Design approach in order to design this appliance. Analysis
of the complete lifecycle has enabled us to control and optimize the effects of the product on
the environment. In particular this appliance exceeds regulation requirements with respect to
recycling and reuse.
The CE marking indicates conformity with European directives LVD and EMC.
The rubbish bin with a line through it indicates that, in the European Union, the product must
undergo selective disposal in compliance with Directive WEEE 2002/96/EC. This equipment
must not be treated as household waste.
Definitions of the measurement categories
„ Measurement category IV corresponds to measurements taken at the source of low-voltage
installations.
Example: power feeders, meters and protection devices.
„ Measurement category III corresponds to measurements on building installations.
Example: distribution panel, circuit-breakers, machines or fixed industrial devices.
„ Measurement category II corresponds to measurements taken on circuits directly connected to low-
voltage installations.
Example: power supply to domestic electrical appliances and portable tools.
ENGlish
Indoor use.
10

Publicidad

Tabla de contenido
loading

Tabla de contenido