MZ electronic MZBC 2460 Instrucciones De Uso página 14

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Components
The package contains:
The battery charger;
Instructions for use.
Remote display panel, with connection cable (3m)
Installation
Installing the battery charger
(see wiring diagram)
Caution
INSTALL THE BATTERY CHARGER IN A DRY AND
VENTILATED PLACE.
The battery charger must be protected from any contact with water or
humidity.
The battery charger must be installed on a vertical wall. Be careful to
leave some space, at least 100 mm, both at the bottom and on the sides
of the battery charger in order to help its cooling.
Drill the 4 required fastening holes in order to place the instrument: the
distance between the holes is indicated below along with the size of the
battery charger.
Follow the instructions in the attached pages for the electrical
connection.
The instrument fulfils EMC standards (EN61000-6-1) and must be
positioned at a distance of 0,5 metres (1,64 Feet) from any radio
reception appliance.
MZBC_2460
14
English
Rev. 02– 2015

Publicidad

Tabla de contenido
loading

Productos relacionados para MZ electronic MZBC 2460

Tabla de contenido