Storage And Downtime Maintenance; Technical Specifications - GOAL ZERO YETI 400 LITHIUM Guía De Usuario

Storage and Downtime Maintenance

Having your Goal Zero Yeti connected to a power source, like a solar panel or wall plug, between
adventures or while in storage keeps its battery healthy and topped off. This prolongs battery
life and will ensure your Goal Zero Yeti is charged and ready to go all day, every day.
If you can't keep your Goal Zero Yeti plugged into a power source during storage,
fully-charge your Goal Zero Yeti every 3 months and store it in a cool, dry place.
Failure to maintain your Goal Zero Yeti by following these steps can result in battery
damage which will void the product warranty.
8

Technical Specifications

Battery:
Cell Chemistry
Pack Capacity
Single Cell Equivalent Capacity
Lifecycles
Shelf-life
Management System
Ports:
USB port (output)
6mm port (output, 6mm)
12V car port (output)
120V AC Inverter (output, pure sine wave)
230V AC Inverter (output, pure sine wave)
UNIVERSAL OR AUSTRALIA (TYPE 1) AC PLUGS
Charging Port (input, 8mm, blue, circle)
General:
Chainable
Weight
Dimensions
Operating usage temp.
Certs
Warranty
Li-ion NMC
428Wh (10.8V, 39.6Ah)
119Ah @ 3.6V
500 Cycles to 80% capacity
Charge every 3-6 months
PWM charge controller, low battery protection
5V, up to 2.4A (12W max), regulated
12V, up to 10A (120W max)
12V, up to 10A (120W max)
120VAC 60Hz, 3A (300W, 1200W surge)
230VAC 50Hz, 1.5A (300W, 1200W surge)
14-22V, up to 10A (120W max)
No
16.3 lbs (7.4 kg)
7.5 x 11.25 x 7.0 in (19.0 x 28.6 x 17.7 cm)
32-104 F (0-40 C)
12 months
9