Motor Safety Filter Cleaning; Exhaust Filter Changing - Sears Kenmore 116.29229 Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MOTOR SAFETY FILTER CLEANING
WARNING
Electrical Shock Hazard
Turn off and unplug vacuum cleaner from
electrical outlet.
Do not operate the
vacuum cleaner
without the motor safety
filter.
Be sure the filter
is dry and properly
installed to prevent motor failure and/or
electrical shock.
;heck motor safety filter occasionally and
clean when dirty.
1. Remove the bag as outlined in the BAG
CHANGING (page 15) section.
2. Lift the rubber
retainer and pull
out motor safety filter
as shown.
3. Wash filter
in warm soapy water, rinse,
then dry.
Do not clean in dishwasher
or
install while damp.
4. Replace the filter by
sliding it back into
place under the ribs in
the bag cavity.
Tuck
filter in so that it fits
completely
under the
rubber
retainer.
5. Replace the bog as outlined in the BAG
CHANGING (page 15) section.
EXHAUST FILTER CHANGING
WARNING
Fire and/or
Electrical Shock Hazard
Do not operate
with
a clogged
exhaust
filter or without
the exhaust
filter
or
exhaust filter cover installed.
HEPA MEDIA EXHAUST FILTER
The exhaust filter cartridge must be
replaced when dirty. Replace the filter
when the entire surface area iscovered
evenly. The filter CANNOT be washed as it
will lose its dust trapping ability.
NOTE: See PARTSAND FEATURES (page 6)
for Exhaust Filter number.
1. Pull out and
up on the
exhaust filter
cover to remove
from the
canister and lay
aside.
3. Replace exhaust
filter cartridge.
Place the new filter
cartridge into the
canister with the
foam seal facing
down towards the
canister.
Tabs
2. Pull the exhaust
filter cartridge
up
and out from the
rear of the
canister.
4. Replace the
exhaust filter cover
by placing
the two
tabs on the filter
cover into the slots
on the canister
and rotate
into
place until it snaps
closed.
- 16 -

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Kenmore 11659229212

Tabla de contenido