Technical Data - SCHOTT KL 300 LED Manual De Instrucciones

KL 300 LED – Operating instructions
Point 2.1 "Assembly"). A base with a corresponding fixing devise is available for use with self-
supporting light guides. Please also refer to our catalogue for more information.
6. Technical data for KL 300 LED
Properties
General information
Type description
Dimensions (W x D x H)
Weight
Cooling
Ambient temperature*
Relative air humidity*
Air pressure*
Transport and storage
Temperature
Rel. air humidity
Air pressure
Contamination level
Electrical information
Operating voltage, frequency
Rated current device
Nominal voltage device
Power consumption, max.
Protection class
Overvoltage category
Diode
LED nominal output
Average LED lifetime LED
Level 5
* Test conditions of DIN EN 61010-1 and UL61010-1 standards
Values
KL 300 LED
mm approx. 107 x 114 x 61
kg approx. 0.35
Convection
°C + 5 ... + 40
% at 31°C ambient temperature: 80%
From 31°C to 40°C ambient temperature:
decreasing linearly to 50%
hPa 800 ... 1060
°C -20 ... +70
% 10 ... 95 (non-condensing)
hPa 500 ... 1200
2
100 - 240 V ~
50 - 60 Hz
1 A
9 V
VA max. 5
II
II
High Power LED
W 3
h 50,000 (luminous flux reduced to 70%)
8/9