BH CAVISILIM Cell Contour YS600 Manual De Usuario página 46

Manual program
Select the hand unit by clicking on the hand unit icon (A). To turn on / turn off the
infrared LED function (for the YS800), click on the icon (G) once you have selected the
infrared hand unit. Select the work mode by clicking on (B). Adjust the time by clicking
on the time icon (D) and then on the adjustment buttons (F). Adjust the intensity by
pressing on the intensity icon (E) and then on the adjustment buttons (F). Click on the
start / stop icon (I) to start the session. Begin to treat the area by sliding the hand unit
slowly and without pressure, as shown in the pictures in the chapter of Application
modes. You can modify the intensity during the cavitation session by pressing on
intensity adjustment (E).
The unit will beep every 30 seconds. If you want to pause the session, click on the
pause icon (H). To return to the session, press the pause icon (H) again.
When the time counter reaches 0.00 the unit will stop and emit a series of beeps to
tell you that the selected session has finished.
46