Craftsman 247.889571 Manual Del Propieratio página 9

.
5.
Positionthechute assemblyoverthe base.See Figure3.
Closethe flangekeepersto securethechute assemblyto the
chute base.See Figure4. The flangekeeperswill click intoplace
whenproperlysecure.
NOTE:If the flangekeeperswill noteasily clickinto place,usethe
palmof yourhand to applyswift,firm pressureto the backof each.
.
a.
b.
Removetheflat washerand hairpinclip from the end of the
chutedirectionalcontrol.
Insertthe end of the chutedirectionalcontrolinto the lower
bracketand securewith the flat washerand hairpinclipjust
removed.See Figure5. If necessary,the lowerbracketcan
be adjusted.Referto ChuteBracketAdjustmentin the
Service& Maintenancesection.
Figure4
f
F
Figure3
\
J
Figure5
9