Unpacking And Set-Up; Basic System Set-Up - iSymphony V1BLUE Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

UNPACKING AND SET-UP

Carefully remove the unit from the carton and remove all packing material from the unit.
Check to be sure that you have all the following items in addition to the main unit:
AM antenna (x1)
FM antenna (x1)
Remote control (x1)
Batteries (x2)
Wireless iPod Dock (x1)
AC adapter for Wireless Dock (x1)
iPod Dock Adapters (x4)
Power cable (x1)
Wall bracket (x1)
If any item is missing, consult your dealer immediately.
We suggest that you retain the original carton and packing materials in case it ever becomes
necessary to return your unit for service. This is the only sure way to protect the unit from damage in
transit. If you do dispose of the carton and packing materials, please do so property. We care about
our environment.
Remove any descriptive labels or stickers from the front panel of the unit. Do not remove any labels
or stickers that may be affixed to the back panel of the main unit of the speakers.
Protect Your Furniture
This model is equipped with non-skid rubber feet to prevent the product from moving when you operate
the controls. These feet are made from non-migrating rubber material specially formulated to avoid leaving
any marks or stains on your furniture. However certain types of oil based furniture polishes, wood
preservatives, or cleaning sprays may cause the rubber feet to soften, and leave marks or a rubber
residue on the furniture. To prevent any damage to your furniture we strongly recommend that you
purchase small self-adhesive felt pads, available at hardware stores and home improvement centers
everywhere, and apply these pads to the bottom of the rubber feet before you place the product on fine
wooden furniture.
6

BASIC SYSTEM SET-UP

Follow these 6 steps to complete basic system set-up.
Set-Up and Connect AM Antenna, Connect and Extend FM Antenna
1
Connect the Main Unit to Power
2
This system is designed to operate on 120V 60Hz AC house current. Connecting this system to
!
any other power supply could result in damage to the unit which is not covered by your warranty.
NOTE: The system has a polarized AC plug with one wide blade and one narrow blade. The plug will
only fit into a matching polarized AC outlets. This is a safety feature to reduce the possibility of electric
shock. If the plug will not fit in your AC outlets, your probably have outdated non-polarized outlets. You
should have your outdated outlets changed by a qualified, licensed electrician. Do not file the wide blade
on the plug, or use an adapter to make the plug fit into your outlet. This defeats the safety feature and
could expose you to electric shock.
AM
FM 75
Antenna
FM
Antenna
Jack
AC outlet
Wider Hole
and Blade
Polarized AC
Cord Plug (One
blade is wider
than the other)
7
AM
Antenna
Jack

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido