Siemens VS08G Serie Instrucciones De Uso página 29

Changing the filter
Cleaning the motor protection filter
The motor protection filter should be cleaned at
regular intervals by tapping it or washing it out.
Open the dust compartment cover.
Remove the motor protection filter in the direction of
the arrow.
Empty the motor protection filter by tapping it.
If the motor protection filter is very dirty, wash it out.
Leave the filter to dry for at least 24 hours.
After cleaning, insert the motor protection filter into
the appliance until it engages and close the dust bag
compartment lid.
Replacing the HEPA filter
The HEPA filter should be replaced once a year.
Press the locking tab in the direction of the arrow to
unlatch the exhaust grille and open it.
Release the Hepa filter by moving the locking lever in
the direction of the arrow and remove it from the
vacuum cleaner.
en
29