Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Interior Lamp
t.
If the door is opened when the power is on, the Interior Lamp is automatically
turned on.
2.
If the door is closed when the power
is on, the Interior Lamp is automatically
turned
off.
3.
Press the Temp and the Spin buttons
simultaneously
or the Drum Light button
to turn the
Interior Lamp on or off.
4.
If 4 minutes have passed after the Interior Lamp is turned on, the Interior Lamp is
automatically
turned off.
Select the Language
t.
Press the Extra Wash and Extra Rinse buttons
simultaneously
for 3 seconds.
2. The "Select the Language"
message
appears
on the display.
3. Turn the Jog Dial to select a language.
You can select English, Spanish,
or French.
4.
Press the Signal button
to select the chosen
language.
Garment+ _::T _
You can add or take out laundry items even after the wash has started, as long as the
"Garment+"
light is on. Pushing
the Start/Pause
button
unlocks
the door, unless the water
is
too hot or if there is too much water
in your Washer. If you are able to unlock the door and wish
to continue
the wash cycle, close the door and press the Start/Pause
button.
My cycle
Allows you to activate
your custom
wash (temperature,
spin, soil level, etc.) with one-button
convenience.
By pushing the My Cycle
button, you activate
the settings
used during the My Cycle
mode.
The "My Cycle"
light will indicate
activation.
You can select all options
as follows
in "My Cycle"
mode.
t.
Select cycle using the Cycle
Selector
dial.
2. After cycle selection,
set each option.
I_See
page 29 for available
option settings
with each cycle.
3o Then, you can start "My Cycle"
by pushing the Start/Pause
button
in "My Cycle"
mode.
The cycle and options
you select will be displayed
the next time you choose
"My Cycle".
You can change
the "My Cycle"
settings
by repeating
the same process
above.
The last used setting will be displayed
the next time you choose
"My Cycle".
Washing a load of laundry 17
Publicidad
Capítulos
Tabla de contenido
