Installation; Operation; Wiring Diagrams; Maintenance/Cleaning - Vortice VORTDRY 1000 Manual De Instrucciones

813 - Vort Dry 1000:Layout 1
ENGLISH

Installation

The appliance must be installed by a professionally
qualified technician using rawl plugs and bolts to fit it
to the wall.
This dryer must be installed out of reach of persons
using the bath, the shower, or the washbasin and in
accordance with all laws and standards governing
installation in the country where the appliance is
being installed.
The appliance should not be installed less than 150
cm off the ground.
÷
(Fig. 1 9).

Operation

The appliance starts working automatically once the
nozzle is removed from its holder (fig. 12) and
switches itself off when the nozzle is replaced (fig.
13). The dryer also switches itself off after about 20
minutes of uninterrupted use: in this case, to restore
normal operation, hook the device onto the wall
mount and wait for a few seconds.
VORTDRY 1000 PLUS: A transformer provides
power to two shaver sockets (230V and 115V) on the
dryer front housing (fig. 14)

Wiring Diagrams

(Fig. 15)

Maintenance/Cleaning

This appliance does not normally require any special
maintenance. As and when necessary, simply wipe off
dust with a soft, dry cloth. If necessary, use a cloth dam-
pened with luke-warm water and a neutral, non-abra-
sive detergent to remove more stubborn dirt. Check that
the air intake is not blocked by hair or fluff.
07/02/2011 16.30 Pagina 9
Important information on eco-
compatible disposal
IN CERTAIN EUROPEAN UNION COUNTRIES THIS
PRODUCT
REQUIREMENTS
IMPLEMENTING THE RAEE DIRECTIVE, AND, IN
THESE COUNTRIES THE PRODUCT IS NOT
SUBJECT TO SEPARATE DISPOSAL OPERATIONS
AT THE END OF ITS WORKING LIFE.
This product complies with European Directive
2002/96/EC.
At the end of its useful life, the
product marked with the crossed
out
disposed of separately from
urban waste. It must be taken to a
differentiated disposal centre for
electrical
appliances or be returned to the
retailer when a new equivalent appliance is bought.
Subject to current legislation on waste disposal, the
user is legally responsible for taking the appliance at
the end of its useful life to a suitable disposal centre.
Appropriate differentiated waste collection for
subsequent recycling, treatment and environment-
friendly disposal of the discarded equipment helps to
prevent possible negative environmental and health
effects and encourages recycling of the component
materials of the equipment.
For further information about available waste disposal
systems, contact your local waste disposal service or
the shop where you bought the product.
The manufacturers and importers comply with their
responsibility for recycling, treating and disposing of
environmentally compatible waste both directly and
collectively.
(Nero/Black pellicola)
DOES NOT FALL
OF NATIONAL
wheeled bin must be
and electronic
WITHIN THE
LAWS