HumanTechnik TA-2 Instrucciones De Servicio página 9

Congratulations on purchasing your
telephone amplifier TA-2 . We hope it
will provide you with many years of
service. You have chosen a modern
and reliable system.
Please read the operating instruc-
tions through carefully to be able to
start the unit correctly and to fami-
liarise yourself with all of the systems
features.
Standard components
Please check if all following compo-
nents are included:
- TA-2
- 6 V power supply unit
- Operating instructions
- Warranty card
If any parts are missing please imme-
diately contact your dealer or the
manufacturer directly.
Operation
Before using the telephone amplifier
please follow these instruction.
1. Telephone receiver cord
First take the wallplug out of the
socket for your telephone connec-
tion. Remove the re ceiver cord from
its cable guide on the underside of
your telephone. To do this, push the
locking clip towards the body of the
plug at the same time as pulling the
plug out of the socket using the cord.
Take this plug on the end of the tele -
phone receiver cord and push it into
the socket on the back of the tele-
phone amplifier so the plug clips into
place. The socket is identified with a
telephone receiver signal.
2. Connecting cable
Take the plug on the end of the con-
necting cable for the hearing amplifier
and push it into the receiver socket on
the base of the telephone. Position the
cable in the empty cable guide.
Finally reconnect the wallplug into
the wall socket for your telephone
connection.
Your telephone is now ready to ope-
rate again.
Switching on
The hearing amplifier automatically
switches itself on when you pick up
the handset of the telephone.
The green light on top of the unit
lights up to indicate this.
Setting the volume/tone
You can use the tumbler dial on top
of the hearing amplifier to adjust the
volume of the signal to a comfortable
level. Turning the dial towards the lar-
ger numbers on the scale increases
the volume, and vice versa. You will
be able to feel the stop at either end
of the dial's travel. Please do not try
to force the dial past these points. In
addition, you can adjust the tone
using the tone control.
English 9