Publicidad
Idiomas disponibles
Idiomas disponibles
Congratulations on purchasing the
PL-100. We hope it will give you many
years of reassuring operation.
Please read through these operating
instructions carefully. They tell you
how to set up the system correctly
and explain all the system's features
to you.
Standard components
Please check if all following compo-
nents are included:
- PL-100
- Operating instructions
- Warranty card
If any parts are missing, please im-
mediately contact your dealer or the
manufacturer directly.
Functional principle
The PL-100 generates a loop signal
which can be received by a hearing
aid with a built-in neckloop. This opti-
on is activated by setting the hearing
aid to the »T« or »MT« position.
Making and receiving calls
1. Place the neckloop around your
neck and plug the 2.5 mm jack
plug into the connection jack so-
cket provided on your mobile pho-
ne or its adaptor.
2. Switch on the PL-100 and adjust to
suitable volume.
3. Use your mobile phone in the
normal way (making and receiving
calls).
4. Switch off the amplifier by turning
the volume control anticlockwise
until you hear a click.
Note
Set the volume control of your mo-
bile phone to the maximum so you
can hear the voice of the person you
are talking to clearly over any back-
ground noise.
Induction loop fastener
The induction loop fastener makes it
easy to put on the device and minimi-
zes the risk of accidents.
English 7
Publicidad
