Cascade - Hansgrohe RainBrain 15841 Serie Instrucciones De Operación

Cascade

The cascade shower program switches alternately between various
showers. The initial configuration determines which showers are active in
the cascade program.
Switch on cascade:
• Press the menu button in the basic configuration (ill. 1).
• You can activate the cascade in the menu window. The cascae procedure
is automatically started.
• An icon indicating that the cascade is active appears in the basic configuration
(ill. 3). You can switch off the cascade by pressing this icon.
Configuring cascade
• Press the menu button in the basic configuration (ill. 1).
• In the menu press the wrench icon on the right next to the cascade (ill.
2).
• The submenu for configuring the cascade appears (ill. 4). The speed at
which the shower change occurs can be changed at 5 levels. 1 = slowest,
5 = fastest.
In the basic configuration you can now see how the active showers change
in time with the cascade.
The contrast shower and cascade cannot be active at the same time. Head,
side, and hand showers can be selected and deselected while the cascade
is active.
When the cascade ends, all showers running during the cascade are also
shut off.
1
38,
Warm up
9
Volume
13:56
1
Operating instructions
°C
°F
5
Menu
English:
Menu

Music
off
Contrast shower
off
Cascade
off
Settings
Back

101
Warm up
Back
 Cascade
Speed
Back
°F
OK
3
Start