SRAM Rock Shox Reverb Bleed Kit Manual Del Usuario página 14

English
5 pRepARe THe syRiNges
Prepare the first RockShox Reverb bleed syringe by filling it ¾ full of RockShox Reverb
Hydraulic Fluid. Hold the syringe with the tip pointed up. Place a rag around the tip and
slowly push any air bubbles out of the syringe. Thread the syringe into the remote bleed
port.
Prepare the second, empty, RockShox Reverb bleed syringe by pushing the syringe
plunger all the way in. Thread the empty syringe into the seatpost bleed port.
14
BleeD pROceDURes
Reverb Bleed Kit User Manual
95-4215-006-000 Rev A