Outdoor Insect Killer
Selecting a Location
•
As insects are attracted to the light emitted by the unit,
do not place the unit too close to human activity.
•
Choose a location approximately 20 feet away from the
area you are trying to protect.
•
If there is a body of water or standing water nearby, hang
the unit between you and the source of water, as water is
a breeding ground for most flying insects.
Installation/Operation
1. After you have selected a location hang the unit
approximately 7 feet above ground from a tree, pole or
other free-standing object.
2. Plug cord into a compatible outlet or an extension cord
rated for outdoor use.
3. Once connected to an electrical source, the unit will be
on. There is no on/off switch.
4. The unit should be taken down in the event of severe
weather.
6
service@801service.net
Installation
Outdoor Insect Killer
Changing Bulbs
This unit uses a 4 prong, 18 Watt UV bulb. It is
recommended that the bulb be replaced annually to
maintain optimal UV effectiveness.
1. Unplug and remove entire unit from hanging
2. Turn the unit upside down, unscrew the bug
3. Pull the bulb cap off. Do not twist off as this could
4. Pull the old bulb out.
5. Slide the new bulb into the socket and push the bulb
6. Twist the bug collection tray back into place.
7. Place unit back into hanging position and plug back
AFTER SALES SUPPORT
AFTER SALES SUPPORT
866 558 8096
866 558 8096
position.
collection tray.
damage the bulb.
cap back on.
into the outlet.
Maintenance
7
service@801service.net