System Info. Mode; Updating The Firmware - Imation 3503 Manual Del Usuario

System Info. Mode

Gives information on the remaining free space available in the Digital
Player memory and the firmware version installed.
To display this information:
1. P ress the central button of the front control panel to enter
the main menu.
. S elect System Info
and press the central button again.
. T he About screen will show up information on the used
and available space in the Digital Player memory and the
firmware revision installed.

Updating the Firmware

Note: If your device is working properly, there is no need to update
your firmware.
The firmware is the device operating system. If you need to update the
firmware, download the corresponding file from the Imation website:
http://latinamerica.imation.com/es/support/index.html
4
Once you have downloaded the device firmware file and installed
the firmware updater application, follow the steps below:
1. Run the firmware updater application.
. When the dialog box above appears on screen, press and hold
the II button of the Digital Player and, without releasing,
connect the device to an available USB port.
. Do not release the II button until the updater application has
recognized the device.
5