Connection To The Usb Port; Disconnection From The Usb Port; Basic Operations - Imation 3503 Manual Del Usuario

Connection to the USB port

All it takes to connect the device to the PC is plugging the suitable
end of the included cable into the USB port of the computer and
the connector into the device input jack. The operating system
will recognize it immediately and will add a graphic icon to the
system tray:

Disconnection from the USB port

To disconnect the unit in Windows XP, Windows Me, Windows
000 or Windows Vista, make sure all dialog boxes indicating active
transfers between the PC and the Digital Player have been closed.
Then, double click the icon to open the Safely Remove Hardware
dialog box. Select the USB device you want to unplug and then click
the Stop button. Only then you can remove the unit safely.
CAUTION!
Please close all related active programs before disconnecting the
unit. Do not unplug the connector if there are still active data
transfers to or from the PC; otherwise, the data saved to the flash
drive may be lost permanently.
1

Basic Operations

Turning the Digital Player on
To turn on the Digital Player press the PLAY
The logo will appear on the screen.
Turning off the Digital Player
To turn the Digital Player off, press and hold the PLAY
until the logo appears on the screen. Then, the unit will turn
off automatically.
Adjusting the volume
Press the + key in the front control panel to increase volume and
the – key to decrease it.
Locking the player controls
To lock the unit buttons and the front control panel, move the
HOLD slider to the locking position indicated by the arrow. In this
position, all unit buttons and the front control panel will not work
and you will be able to carry the unit around safely in your pocket
without worrying of pressing buttons accidentally.
button.
button
1