Troubleshooting - Imation 3503 Manual Del Usuario

4. After the Digital Player is ready, click on Start to begin firmware update.
Note:
Do Not disconnect the device or run any programs during
the firmware update.
5. Once the firmware update is completed, click Close to exit the program.
6

Troubleshooting

Problem
Device does not
The battery may be uncharged. Charge it
turn on following the instructions.
A problem may exist with the rechargeable
battery. Contact the service center.
Buttons don't
Maybe you have moved the HOLD slider to
work the locking position and all controls have
been deactivated. Move it again to unlock
the controls.
The computer
Check the USB connection to the PC USB port.
does not recognize
Turn the Digital Player off and on again and
the Digital Player
retry.
There is no sound
Check the volume setting is not set to 0
and make sure the earphones are plugged
properly in the earphone jack.
Strange characters
Make sure you have selected the correct
on screen
language.
Solution
7