3. Part : INSTALLATION AND PREPARATIONS FOR USE
3.1. Locating your built-in hob
Create a space to install your hob, following the dimensions indicated on figure.
100 mm from edge of cooker to combustible materials.
•
700 mm underside of overhead cupboards, shelving
•
750mm underside of overhead extractor fans.
•
IMPORTANT: This appliance must be installed according to the manufacturers
installation instructions, local building regulations, gas authority codes and
electrical wiring instructions.
Neighbourhood walls A[mm] B[mm]
Combustible
Non-combustible
6
60
150
25
40
Figure 1