Motorola DCX700 Guia De Inicio Rapido página 13

Troubleshooting
Problem — If this occurs:
There are black bars on all
four sides of the picture
Colors do not appear
correctly
DCX700 Quick Start Guide
Solution — Then do one of the following:
This may occur on a 4:3 TV if the 4:3 OVERRIDE setting is OFF . To set 4:3 SD programming to fill the screen,
depending on the capabilities of the TV, set 4:3 OVERRIDE to 480i or 480p.
This may occur on a 16:9 TV if the active video for an SD broadcast is in letterbox format. To confirm, wait
for a commercial or look for a graphic, such as a network logo. If the commercial fills the screen from top to
bottom, or the graphic appears below the active video, the program is being
letterboxed by the broadcaster. You can minimize this by activating the zoom feature on the TV.
A broadcaster may include black bars on either side of a widescreen broadcast. This is called a "hybrid"
aspect ratio and results in a black border surrounding the video on a 4:3 TV. Because this is part of the
broadcast, the set-top cannot correct the video. You may be able to minimize the border using the zoom
feature on the TV.
Be sure to match up each signal to the same YPbPr connection on the TV.
Otherwise, colors will not appear correctly on your TV.
12