Mixer Safety Warnings - SPARKY BM 1360CEPlus Instrucciones De Uso

ures reduce the risk of starting the power
Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
Maintain power tools. Check for misalign-
ment or binding of moving parts, break-
age of parts and any other condition that
may affect the power tool's operation. If
damaged, have the power tool repaired
before use. Many accidents are caused by
Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp cut-
ting edges are less likely to bind and are
Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for op-
erations different from those intended could
5) Service
placement parts. This will ensure that the
Mixer safety
warnings
During operation provide eye protection
particles. Wear goggles.
Take protective measures against inha-
lation of dust. Some materials can contain
WARNING: Before connecting a tool
to a power source be sure that the voltage
nameplate of the tool.
Original instructions
injury to the user, as well as damage to the
tool.
the nameplate rating is harmful to the motor.
potential overheating.
must ensure that it has the right ampere rating
for your power tool and it is in safe electrical
condition.
WARNING: Always switch off and un-
plug the power tool prior to any adjustment,
servicing or maintenance or in case of mains
drop-out.
cure stance. The power tool is guided more
secure with both hands.
keep your hands away from rotating parts of
-
the machine.
-
terial to be stirred, pull the plug immediately
and have the power tool checked by an after-
sales service agent. Material that has pene-
trated the power tool can cause damage and
lead to an electric shock.
the ventilation slots clean. If cleaning is nec-
metal objects to clean the vents, taking care
not to damage the internal machine parts.
area of the power tool.
ble. Do not touch the damaged cable and pull
the mains plug when the cable is damaged
while operating. Damaged cables increase
the risk of electric shock.
purpose. Any use other than those mentioned
in this Manual will be considered a case of
misuse. The user and not the manufacturer
shall be liable for any damage or injury result-
ing from such cases of misuse.
-
-
-
5
EN