Machine Components; Machine Setup - Tennant V-WD-15 Manual Del Operario

MACHINE COMPONENTS

1. Check carton for signs of damage. Report
damages to carrier immediately.
2. Check carton contents to ensure all accessories
are included. Contact distributor for missing items.
5
4
1. 1 - Machine
2. 1 - 10 ft / 3 m vacuum hose - used with
accessory tools
3. 1 - Paper bag
4. 1 - Cloth bag
5. 1 - 50 ft / 15 m power cord
OPTIONAL ACCESSORIES:
3
1. 190108 - 27 in / 68 cm Squeegee Kit
190972 - 33 in / 84 cm Squeegee Kit
190958 - 40 in / 100 cm Squeegee Kit
2. 605178 - Wet/Dry Floor Tool Kit
3. 190142 - Standard Floor Tool Kit
4. 190928 - Wet Floor Tool Kit
V- WD- 15 / V- WD- 15S (08- 2017)
1
2
3
4

MACHINE SETUP

SQUEEGEE KIT ATTACHMENT (OPTIONAL)
FOR SAFETY: When servicing machine, unplug
cord from wall outlet. Use manufacturer supplied
or approved replacement parts.
1. Empty recovery tank.
2. Remove vacuum bags.
3. Tip machine on back.
4. Remove (2) bolts and washers located at bottom of
machine.
5. Install squeegee mounting bracket (supplied with
kit). Re- install bolts and washers (Figure 1).
6. Fasten squeegee to mounting bracket. Use (2)
clevis and cotter pins provided (Figure 2).
7. Stand vacuum upright.
OPERATION
FIG. 1
FIG. 2
EN
5