Electrical Connections; Grounding Instructions; Attaching Discharge Elbow - Joneca ASD-1250 Manual De Instrucciones

4. ELECTRICAL CONNECTIONS

A. Connect disposer to appropriate household current
only.
WARNING:
IMPROPER CONNECTION OF THE EQUIPMENT-GROUNDING CONDUCTOR CAN RESULT IN A
RISK OF ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICEMAN IF YOU ARE IN DOUBT
AS TO WHETHER THE APPLIANCE IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE
APPLIANCE IF IT WILL NOT FIT THE OUTLET. HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.

GROUNDING INSTRUCTIONS

FOR WASTE DISPOSERS EQUIPPED WITH A
GROUNDED PLUG-IN POWER CORD.
B. This appliance must be grounded. In the event of a
malfunction or breakdown, grounding provides a path
of least resistance for electric current to reduce the
risk of electric shock. This appliance is equipped with
a cord having an equipment-grounding conductor and
a grounding plug. The plug must be plugged into an

5. ATTACHING DISCHARGE ELBOW

A. Connect waste elbow to the disposer (see 5A), proceed to step 6
and then connect bottom of the elbow by tightening the slip nut
(see 5B).
B. If you are connecting to a dishwasher, return to section 2B. If not,
make sure all plumbing connections are tight and in accordance
with all plumbing codes and ordinances. Run water and check for
leaks.
6. MOUNTING SILVER GUARD® TO SINK FLANGE
After the disposer is fully mounted to the sink;
with the flat portion of the black strap facing the
metal sink flange, guide the Silver Guard®
through the mount screws, (6A). Place the Silver
Guard® between the Support Flange and Upper
Mount Ring. Please note (6B) that the Silver
Guard® must be placed under the flange of the
Support Ring. Once the Silver Guard® is fitted,
firmly press on the snaps to secure the strap
(6C).
7. OPERATING INSTRUCTIONS
The Anti-Jam Swivel Impellers make a clicking
sound as they initially swing into place. This
indicates normal operation.
A. Remove sink stopper. Turn on a medium flow of cold
water.
B. Turn switch to ON position; your motor is turning at full
speed and ready to use.
C. Scrape in food waste. Down the drain go table scraps,
peelings, rinds, seeds, pits, small bones and coffee
grounds. To speed up food waste disposal, cut or
break up large bones, rinds and cobs. Large bones
and fibrous waste require considerable grinding time
TIPS FOR SUCCESSFUL OPERATION
A. Be sure disposer is empty before using your dishwasher so it may drain properly.
B. You may want to leave the stopper in the sink drain when not in use to prevent utensils and foreign objects from
falling into the disposer.
C. Your disposer is ruggedly built to give you many years of trouble free service. It will handle all normal food
wastes, but it will NOT grind or dispose of such items as plastic, tin cans, bottle caps, glass, china, leather, cloth,
rubber, string, clam and oyster shells, aluminum foil or feathers.
The receptacle to which this appliance is
connected must be controlled by a switch.
appropriate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances. If the supply cord is damaged it must be
replaced by the manufacturer, its service agent or
similarly qualified person in order to avoid a hazard.
Removing an attached power cord or plug voids
the warranty.
5A
6A
and are more easily thrown away with other trash. Do
not be alarmed that the disposer slows down while
grinding. The disposer is actually increasing torque
(grinding power) and is operating under normal
conditions.
D. Before turning disposer off, let water and disposer run
for approximately 15 seconds after shredding or
grinding stops. This assures that all waste is thoroughly
flushed through trap and drain.
E. It is not recommended to use hot water while running
disposer. Cold water will keep waste and fats solid so
disposer can flush away particles.
5
RUBBER
GASKET
5B
6C
6B
WARNING: This is not a toy. Keep uninstalled
Silver Guard® away from children.