Technical Data; General Characteristics - Kangaroo Kn-18GH Manual De Instrucciones

1B
OPERATION
1.3

Technical Data

Dimensions (mm)
Shoe size (mm)
Working weight (Kg)
Compaction depth (mm)
Percusión rate (1/min)
Travel speed (m/min)
Jumping height (mm)
Impact force (Kg)
Engine
Engine type
Rated output
Continuous output
Rated speed (rpm)
Engine lubrication level (L)
Engine lubrication
Fuel tank (L)
Oil scale
1.4

General Characteristics

The Rammer Kn-18GH/GR will be used by personnel trained for this job, it will only be used in
specific jobs for which it has been technically developed, after having read the instructions contained
in this manual and which must be followed correctly.
The manufacturer or authorised distributor must be consulted about any doubts.
Industrias Technoflex S.A., will not accept any responsibility derived from incorrect installation,
manipulation, or misuse of the tamping rammer.
1B-4
725 x 438 x 950
280 x 333
75
400 - 600
650
14 - 18
45 - 55
1800
KN-18GH HONDA - GX120
KN-18GR ROBIN - EH12-2D
4-stroke, air-cooled, OHV,
gasoline engine
4.0 H.P/ 4000 rpm
2.8 H.P/ 3000 rpm
3600
Honda = 0.6
Robin = 0.3
SAE 10W - 30
2.0
95 oct
ENGLISH